Test

Product Testing Before & After Installation of Power Saver


TEST 1

Test method


Before

After

TEST 2

Before: Reading 1.145

After: Reading 0.891

Results
The energy saving is 22% from the above testing. However there are many different types of electrical appliances used at home. The % of electricity saving will be changed (+/-) from time to time. The above testing shows 4 x 20W fluorescent light tubes were used, and the different is 0.251 AMP
Comments:
The PowerSaver is technology reduces and saves energy by stabilizing the voltage, reductions in peak power demand and wastage of low efficient power. The low-efficient power can be stored and recycled by PowerSaver while electrical appliances demanding electricity. The PowerSaver has been undergone the technical appraisal by Shenzhen Product Quality Inspection Institute and tested by laboratory with the essential requirements found in compliance with the European Standards(CE certified) We have been submitting our PowerSaver to the certified Laboratory subsequently over the past 12 months, results in mean values are given as below:
Testing Condition 200V/50Hz 200V/60Hz 220V/50Hz 220V/60Hz Before PowerSaver is used 0.591A 0.325A 0.688A 0.547A After PowerSaver is used 0.325A 0.209A 0.387A 0.229A Energy - Saved in % 54% 43% 56% 41%

Daylight fluorescent light tubes were used for the testing in the laboratory. However, the condition applied in the laboratory and the normal home are different. We suggest that the % of energy-saving should be up to 40%.

Please note that the above figures are for reference only, the % of energy saved is also depends on the different electrical appliances. Which means, higher quality electrical appliances will help in giving better results of energy saving.

Daylight fluorescent light tubes were used in the testing in the laboratory. However, the condition applied in the laboratory and the normal home are different. We suggest that the % of energy-saving should be around 25-30%.


Please note that the above figures are for reference only, the % of energy saved is also depends on the different electrical appliances. Which means, higher quality electrical appliances will help in giving better results of energy saving.

How can I check the unit, to see if it will save energy OR not ?
It is possible, once your Electricity saver unit arrives to run an immediate test. To do this, use an extension lead from the nearest power socket, if required, to enable you to stand in front of your electric meter.
While running this test, be sure to have an appliance such as an electric kettle or any other appliance that consumes a reasonable amount of power switched on, in the region of 1 to 2 kW. While standing in front of the meter observing the regular speed of the wheel or (the meter clock) in your meter, plug the Electricity saver into the extension lead, you will immediately see the wheel speed reduce, this in turn is an immediate indication of future reductions in your Electric Bill.